Meec tools 022576, Operating Instructions Manual

Page: 37 / 78

EN
37
and use low-power/vibration mode and
suitable safety equipment.
• Take the following precautions to
minimise the risks of exposure to
vibrations and/or noise:
– Only use the tool in accordance with
these instructions.
– Check that the tool is in good
condition.
– Use accessories in good condition,
and which are suitable for the
purpose.
– Keep a firm grip on the handles/grips.
– Maintain and lubricate the tool in
accordance with these instructions.
SYMBOLS
The following symbols can be of importance
for how you should use your power tool.
Make sure you understand the symbols
and their significance.
Read the instructions.
Wear a dust filter mask.
Wear ear protection.
Wear safety glasses.
Safety class II.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage 230 V ~ 50 Hz
Output 1200 W
Max speed
11000 – 30000 rpm
Safety class II
Cutting depth 55 mm
Bit holder Ø6 and Ø8 mm
Cord length 2 m
Weight 3 kg
Sound power level, LwA 101 dB(A), K=3 dB
Sound pressure level, LpA 90 dB(A), K=3 dB
Vibration level 5.4 m/s², K=1.5 m/s²
Always wear ear protection!
The declared vibration value, which has been
measured by a standardised test method,
can be used to compare different tools with
each other and for a preliminary assessment
of exposure. The measurement values have
been determined in accordance with
EN 62841-2-17:2017.
WARNING!
The actual vibration level when using power
tools may differ from the specified maximum
value, depending on how the tool is used.
It is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
DESCRIPTION
Router with powerful motor and adjustable
cutting depth.