EN
50
ASSEMBLY
REMOVING AND CLEANING OF DUST COLLECTOR
1. Pull the dust collector off the product.
2. Empty the dust collector and replace it on the product.
USE
WORK AREA AND WORKPIECE
•
Keep the work area clean and well lit. Keep other people,
especially children, and pets at a safe distance from the
work area.
•
Place the power cord so that it cannot be damaged by
moving parts. Plug the plug into a suitable power point,
and so the cord does not obstruct the work.
•
Secure the workpiece with a clamp, clips or vice.
•
Use a suitable detector to check there are no electric
cables, gas and/or water pipes in the work area.
CHOICE OF SANDPAPER
Use a suitable grade of sandpaper for the work. Sandpaper with
aluminium oxide, silicon carbide and other synthetic abrasives
provide better sanding.
Coarse sandpaper removes more material, while fine sandpaper
produces a smoother surface. Choose coarse sandpaper to sand
rough surfaces. Use medium coarse sandpaper to remove marks
