EN
15
1. Depth adjustment collar
2. Installation tool
3. Drill
4. Tap
5. Thread inserts
FIG. 1
USE
IMPORTANT:
After drilling or threading operations all metal shavings must
be carefully removed with compressed air or a magnet.
1. Drill out the damaged thread or screw with the spiral drill (3).
2. Cut new thread in the drilled hole with the tap. Use a
suitable cutting fluid for best results.
3. Put the thread insert on the installation tool. The driving tap
on the thread insert must be put in the tap groove on the
installation tool. Adjust the depth stop ring. Fit the thread
insert in the newly cut thread and screw it carefully in place.
4. Snap off the installation tap with pliers.
NOTE:
Depending on the application a magnet may be need to
remove the snapped installation tap. For larger sizes of thread,
especially spark plug thread, the installation tap should be
snapped and removed with snipe nose pliers.
Summary of Contents for 018722
Page 3: ...2 1 3 4 5 1 ...
Page 4: ...2 A ...
