EN
15
all the parts are included. Do not attempt to
assemble or use the product if any parts are
missing or damaged. Contact the retailer.
• Open the package and carefully unpack
the product.
• Remove all packaging materials and any
transport protection.
• Check that all the parts are included.
• Inspect the product and accessories for
damage.
• Save the packaging materials for future
use.
WARNING!
Do not allow children to play with the
packaging material or the product. Do not
allow children to play with plastic bags, foil
or small parts. Risk of suffocation!
INSERTING/REPLACING BATTERIES
1. Switch off the product with the power
switch (1).
2. Open the battery cover (6) by pressing
down the lock tab (a) on the 1/4 inch
female thread (7).
3. Insert the batteries (b) with the correct
polarity.
4. Close the battery cover (6) and check that
the lock tab snaps in place.
5. The batteries are discharged if the status
light flashes red even when the product is
standing upright. Replace the batteries in
accordance with the instructions above.
FIG. 2
STARTING AND SWITCHING OFF
Starting
1. Place the product on a flat surface or
fit it on the fastener as described in the
instructions in the section “Vertically
adjustable fastener”.
Wavelength, vertical laser
635 nm
Wavelength, horizontal laser
650 nm
Laser class
2
Laser power
< 1 mW
Weight
0.3 kg
DESCRIPTION
INTENDED USE
The product is a cross-line laser intended for
the projection of lines on walls to align tiles,
windows, doors, and hang pictures etc.
The product must only be used for its intended
purpose and in accordance with these
instructions, all other use is to be considered
as incorrect. The manufacturer cannot be
held liable for any personal injury or material
damage resulting from incorrect use. The full
responsibility for any such personal injury or
material damage rests on the user.
NOTE:
The product is not intended for commercial
or industrial use. Commercial, professional or
industrial use (or equivalent) will invalidate
the warranty.
1. Power switch (also locks the pendulum on
the product)
2. Vertical laser
3. Horizontal laser (360°)
4. Display
5. Button for selection of laser line
6. Battery cover
7. 1/4 inch female thread
FIG. 1-3
USE
UNPACKING AND CHECKING
Carefully unpack the product and check that
Summary of Contents for 010974
Page 3: ...1 2 3 4 ...
