35
Installation on workbench
Secure the tool firmly to the workbench with the
clamp.
OPERATION
Applications
The tool is intended for sanding flat exterior and interior surfaces, rounding corners and edges, deburring,
removing paint, welding spatter and rust, and for sharpening knives and sissors etc. All other applications
are considered to be unsuitable. Do not use the tool for anything other than the purpose for which it is
intended to be used for.
Starting/stopping
Start the tool by pressing
down the part of the power
switch marked 1. Switch off
the tool by pressing down the
part of the power switch
marked O.
NOTE:
Always lift the tool off
the
workpiece
before
starting/stopping the tool.
Adjusting the speed
Turn the speed control to the
required speed (2).
Summary of Contents for 010-137
Page 37: ......
