EN
18
• Never touch the soldering tip when the
plug is plugged in.
• Tin solder contains lead, which is a toxic
metal. Always wash your hands after use.
• A damaged charger or battery must be
replaced by an authorised service centre,
or a qualified person, to ensure safe use.
• Even if the product is used in accordance
with the instructions it is impossible to rule
out all risk factors. The following are
potential risks associated with the type
and design of the product.
– Risk of damage to lungs if an effective
breathing mask is not worn.
– Risk of eye damage if safety glasses
are not used.
– Risk of burn injury from contact with
hot surface.
SAFETY INSTRUCTIONS FOR
BATTERIES
• Never attempt to open batteries.
• Do not store the where the temperature
can exceed 40°C.
• Only charge at an ambient temperature of
4 to 40°C.
• Only charge with the supplied charger.
• Recycle used batteries in accordance with
local regulations.
• Never short-circuit batteries. Short
circuiting the battery produces a high
current that overheats the battery, which
can result in a risk of fire, corrosive injury
and/or material damage.
• Do not expose batteries to heat. Batteries
can be damaged if they are exposed to
temperatures over 100°C, which can result
in a risk of fire, corrosive injury and/or
material damage. Batteries must not be
burned – risk of explosion or leakage.
• A small amount of fluid can leak from the
battery during extreme use, or in extreme
SAFETY INSTRUCTIONS
Follow all the safety instructions and operating
instructions.
• All persons who use or service the product
must have read these instructions and be
aware of the potential risks associated with
the product.
• This product can be used by children from 8
years and upwards and by persons with
physical, sensorial or mental disabilities, or
persons who lack experience or knowledge,
if they are supervised or receive instructions
concerning the safe use of the product and
understand the risks involved with its use.
Do not allow children to play with the
product. Do not allow children to clean or
maintain the product without supervision.
• The soldering pen is intended for melting
and applying solder on different surfaces,
such as a circuit board.
• Do not use the product when other
persons, especially children, or pets, are in
the vicinity.
• Always follow local regulations for safety at
the workplace and prevention of accidents.
• Never modify the product in any way. The
manufacturer cannot be held liable for any
personal injury and/or material damage
resulting from such modifications.
• Put the product on its stand when not in
use.
• The product must only be connected to an
earthed power point 230 V ~ 50 Hz.
• Wear safety glasses.
• Only use the product in a well ventilated
area. Wear safety glasses.
• Put the product on its stand when not in
use.
• Keep the work area clean, well lit and
ventilated.
• Never leave the product unattended when
plugged in.
• Only use the product on a fireproof
underlay.
Summary of Contents for 009851
Page 3: ...1 2 A B C 1 2 3 4 5 6 7 8 ...
Page 4: ...3 4 5 4 5 6 ...
