EN
39
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output
S1 1500 W/S6 25% 1800 W
Safety class
II
Saw blade
216 x 30 x 2.4 mm / 24 T
Speed
0 – 5200 rpm
Turntable
- 45° / 0° / 45°
Sawing capacity (max)
0°/0°
305 x 65 mm
45°/ 0°
215 x 65 mm
0°/45°
305 x 36 mm
45°/45°
215 x 36 mm
Laser class
2
Laser, wavelength
650 nm
Laser, output
≤ 1 mW
Sound pressure level, LpA 95.5 dB(A), K=3 dB
Sound power level, LwA 108.5 dB(A), K=3 dB
Cord length
1.8 m
Weight
13 kg
Always wear ear protection!
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 62841-3-9:2015.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
– Maintain and lubricate the tool in
accordance with these instructions.
LASER
• Do not look directly at the laser beam.
• Never point the laser beam at reflective
surfaces, people or animals. Even low
power laser beams can damage the eyes.
• Any deviation from the work method
described here can result in a risk of
dangerous exposure to radiation.
• Never open the laser module.
• It is not permitted to modify the laser in
any way to increase the power of the laser.
• The manufacturer cannot assume liability
for any damage resulting from failure to
follow the safety instructions.
SYMBOLS
Read the instructions.
Laser beam. Do not look into
the beam. Laser class 2.
P0:
≤
1 mW
λ:
650 nm
EN 60825-1: 2014
Safety class II.
Approved in accordance with
the relevant directives.
Recycle end-of-life product
in accordance with local
regulations.
