EN
20
FIG. 3
4. After use, store the nozzles and extension
tube on the back of the vacuum cleaner.
FIG. 4
USE
NOTE:
Never use the vacuum cleaner without a
HEPA filter.
1. Connect the vacuum cleaner plug to an
earthed power outlet.
2. Start the vacuum cleaner by turning the
power switch to
I
.
3. Adjust the air flow with the slider control.
4. Turn the power switch to
O
to switch off.
POWER TOOL CONNECTION
NOTE:
• The vacuum cleaner and power tool
must be switched off when connecting.
• Max. output for the connection of power
tools is 2000 W.
1. Connect the power tool to the vacuum
cleaner.
2. Connect the vacuum cleaner plug to an
earthed power outlet.
3. Move the power switch to
. The
vacuum cleaner works when the power
tool is running and shuts off when the
power tool is switched off.
– In
O
position the vacuum cleaner
and power tool are switched off.
– In
I
position the vacuum cleaner can
be used, but not the power tool
FIG. 5
TECHNICAL DATA
Voltage
230 V
Output 1200 W
Volume
20 l
Noise level
78 dB
Cord length
5.3 m
DESCRIPTION
1. Floor nozzle
2. Extension tube
3. Slide control
4. Handle
5. Hose
6. Hose connection outlet
7. Power switch
8. Power tool connection
9. Carry handle
10. Latch
11. Wheel
12. Dustbin
13. Hose connection vacuum cleaning
FIG. 1
ACCESSORIES
14. Radiator nozzle for vacuuming in corners
and crevices
15. Brush nozzle - for vacuuming furniture,
curtains, etc
16. Floor nozzle - for vacuuming mats
17. Floor nozzle - for vacuuming hard floors
and for sucking up water
FIG. 2
ASSEMBLY
1. Insert the container’s castors in each hole.
2. Insert and turn the handle in the
extension tube.
3. Connect an appropriate nozzle.
Summary of Contents for 002-358
Page 3: ...2 15 14 16 17 1 14 1 3 2 4 5 1 12 13 11 10 9 8 7 6 ...
Page 4: ...3 4 6 5 6 9 ...
Page 5: ...18 19 7 ...
