EN
56
General use
1.
Always check that the product, its power cord and plug, and its accessories, are not damaged
before using it. Do not use the product if it is damaged or shows signs of wear.
2.
Recheck that accessories are properly attached.
3.
Always hold the product with the handles. Keep the handles dry to ensure a firm grip.
4.
Make sure the air vents are clear and not blocked. Clean them with a soft brush if necessary.
Blocked air vents can cause the product to overheat and become damaged.
5.
Switch off the product immediately if other people enter the work area and interfere with
your work. Always allow the product to completely stop before putting it down.
6.
Do not overexert yourself. Take regular breaks to maintain your concentration on the work
and full control of the product.
WARNING:
Bear in mind that there can be concealed objects in every home. Make sure there are no
concealed gas or water pipes, or electric cables – risk of electric shock and serious personal injury or
material damage. Use a suitable detector to trace such objects in advance.
Adjustments
WARNING:
Do not make any adjustments before the product has been switched off and has
completely stopped. Always make sure that switches are in the correct positions for the particular job.
Do not use the product with a switch in another position.
Mode selector
Select mode before starting. The product can be used for percussion drilling or normal drilling.
Function
Symbol
Application
Percussion drilling
Percussion drilling and drilling
(brick, concrete and masonry)
Drilling
(Drilling (wood, metal and
plastic).
Summary of Contents for 000-138
Page 61: ......
