Medva ECO240 BAC, Instruction Manual

Page: 3 / 16

GENERAL SAFETY INSTRUCTIONS
SAFETY RULES FOR THE INSTALLER
• WARNING! In order to ensure personal safety, it is important to follow all instructions carefully. Improper
installation or improper use can result in serious personal injury.
• This installation manual is an integral part of the product and must be delivered to the user. Keep this
installation manual and all information material.
• This product has been designed and built exclusively for the use indicated in this manual.
Any application not indicated could be harmful to the equipment and/or represent a source of danger.
• To ensure proper operation of the mechanism and an adequate degree of safety, use only original spare
parts, accessories and fixtures.
• Do not install the device in an explosive atmosphere. The presence of flammable gases or fumes implies a
serious safety hazard.
• The mechanism has a torque and anti-crush controller in the BACN version. However, other safety devices
(e.g. photocells, sensitive strips, etc.) must also be installed to prevent dangers arising from moving mechanical
actions (crushing, dragging, shearing).
• For each installation it is necessary to use at least one light-signalling device, as well as a sign correctly
attached to the gate structure.
• Installation, electrical connection, adjustments and maintenance of the appliance must be carried out
exclusively by professionally qualified technical personnel. Wrong installation or improper use of the product
can cause serious damage to people or property.
• Always install a differential with a value of 0.03 A. and a thermomagnetic switch with an opening of the
contacts of at least 3 mm provided with overload and short circuit protection.
• Connect the yellow-green ground cable to the terminal marked with the symbol on the control panel, the
safety of this appliance is guaranteed only when the mechanism is connected to a proper ground installation
according to current regulations.
• The mechanism must not be put into definitive operation before all the connections have been made, the
efficiency of the safety devices controlled and the pushing force configured to the minimum, in compliance
with the regulations in force concerning automatic doors (Directive 89/392 and standards EN 12453 and EN
12445).
• Ensure gate structure is solid, balanced and suitable to be activated, ensure that the gate does not have
friction points during its movement
SAFETY RULES FOR THE USER
• In case of malfunction, do not attempt to repair and contact a specialist technician
• Do not allow children or pets to approach the gate. Never let children stand or play with gate controls. Keep
remote controls away from children and users who are not authorized to operate them; keep controls where
unauthorized users or children cannot access them.
• In the event of a power failure or emergency, you must know how to release the gate to be able to manipulate
it manually.
• Please keep these safety instructions. Please make sure everyone who uses or is near the gate is aware of
the hazards related to automatic gates. If you sell the property with the gate mechanism or sell the mechanism
separately, please provide the new owner with a copy of these safety instructions.