Medva ECO240 BAC, Instruction Manual

Page: 7 / 16

ASSEMBL
Y DIMENSIONS 360 (C=90)
*Measurements in millimetres.
EXAMPLE (STANDARD)
EXAMPLE (SPECIAL DIMENSION)
We are occasionally forced to vary the standard dimensions for reasons of space when placing the supports The above graphs refer to the
both automatic models (240-280) and when the opening is inwards.
The gates’ opening degrees are shown at the top of each of the graphs, from these values a cross section line emerges on which dimensions
A and B may be obtained (Fig.2 Page 5) . It is important to be as close to the thick vertical line as possible.
Dimension C remains constant in both motors, model 360 C=90 mm, model 280 C=80 mm and model 240 C=70
Example: What would be the dimension A and what engine should I use to automate a gate with a 100° opening where B=140 mm?
A motor with a 360 mm stroke length and dimension A=195 mm. (see example in graph of the 360 with thick discontinuous line, special
dimension).
ASSEMBLY DIMENSIONS 280 (C=80)
SPECIAL DIMENSIONS OPENING INWARDS (Fig.2)
ASSEMBLY DIMENSIONS 240 (C=70)