Technology Description-
Floating, electric powered, circulation and Trihalomethane (THM) removal equipment for
potable water tanks and reservoirs. Designed for continuous operation and Factory installed through 24-inch diameter,
clear and unobstructed hatch opening.
Figure 1:
SN15
Electrical Requirements -
Requires 480VAC/3PH, 60Hz power. Ixom recommends secondary disconnect to be
located near equipment access hatch. Optional Franklin SubMonitor Connect three-phase motor protection unit highly
recommended and available from Ixom.
All switches, breakers, emergency stop buttons, control panels and other controls
shall be installed in accordance to all NEC, State, and local regulations.
(Not supplied by Ixom)
Patent Pending
Subject to change without notice.
Certifications
- Ixom’s potable water products are certified to ANSI/NSF Standard 61, and 372 for lead-free content.
Learn more at: www.medoraco.com/std61
Maintenance / Warranty
- Limited maintenance. Limited 2-year parts and labor warranty. See Warranty Statement for
details.
Spray Unit Direct Flow Rate
- 1.1 Million Gallons Per Day,
MGD.
Ixom application engineering evaluations often require
sizing systems based on site specific conditions and NOT
the spray aeration direct flow rate.
Minimum Water Depth
- Minimum of 5ft (1.5m) operating
depth required,
do not operate out of water.
Minimum Head Space
- Minimum of 30in (76cm) head space
between water level and reservoir/tank ceiling required.
(
Contact Ixom for exceptions that can be made.)
Sealed Penetration Fitting -
T316 stainless steel tank fitting with a 3/4” NPT female connection. Not designed
as a submersible penetration.
Wiring -
4-conductor, submersible power cable for submersible motor wiring terminated exterior at top of tank.
Motor -
15HP stainless steel submersible, designed for continuous operation, low power requirement, direct drive,
no gearbox and no lubrication schedule required. See certifications section below.
Materials of Construction
- T316 stainless steel,
thermoplastic rubber, High Density Polyethylene construction.
GridBee
®
Machines are constructed using safe materials for
contact with potable water. See certifications section below.
TTHM Reduction Range
- Dependant on THM Species,
Daily Inflow and other variables, see Ixom for proposal.
Minimum Access Opening
- Machine can be placed
through 24-inch (61 cm) diameter, clear and unobstructed
hatch opening.
Intake -
20 to 100+ feet (6 to 30+ m) available in 12-inch (30.5 cm) diameter X 20 feet (6 m) sections, thermoplastic
rubber, NSF/ANSI 61 approved. Includes low elevation intake that draws water in a horizontal layer within 18 inches
(45 cm) of the tank or reservoir floor. Includes intake retrieval chain constructed of 316 stainless steel.
Shipping Size / Weight
• Crate -
72in x 48in x 59in (1.85m x 1.22m x 1.5m) / 1200lbs (550kg)
Exact weight and dimensions varies dependent
on machine configuration.
© 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | [email protected]
Technical Data Sheet
SN15
1555_10015_20200422
O&M_SN15_10030_20200619 - 10
