MedMassager MMF07, Owner'S Manual

Page: 17 / 32

17
OWNER’S MANUAL OWNER’S MANUAL
med med massager massager
operating instructions operating instructions
THIS MASSAGER IS NOT A TOY. ADULT SUPERVISION IS NECESSARY.
• Before each use, check the power supply cord and be sure that every
part is in good working condition. All parts must be firmly assembled.
• Make sure that the speed switch is in the OFF position before plugging the unit in.
• Check the silver model label affixed to the unit for the correct operating voltage:
110-120V for North American models & 220-240V for European, African and
Australian models. Asian and South American consumers, please verify where your
model is from before proceeding.
• Plug the unit into an electrical outlet of the same voltage as your model.
• Turn the unit to the desired speed and use as suggested below.
• When finished, turn the switch back to the OFF position and unplug the unit. The unit may
emit a buzzing sound when left plugged in, even with the speed knob on the off position.
This is normal operation since the unit is always on “standby mode” when plugged in.
using the foot massager using the foot massager
• Place the foot massager on a hard, firm surface. Carpeting is recommended or the use of
a rug may be necessary when using the massager on wooden or ceramic flooring.
• Turn the massager on, starting with the lowest speed. Place your feet (socked feet or
with shoes on) onto the foot pad. You can then adjust the speed to a comfortable setting.
• You can use the arch bar on the top of the foot pad for added stimulation of the toes,
arch and heel.
• Rocking the massager forward allows you to stimulate the calf area
and shins more effectively.
• DO NOT STAND ON THE MASSAGER. Irreparable damage will be inflicted to internal parts.
maintenance maintenance
• Turn the massager to the OFF position and unplug the unit.
• To clean the pad, use a moistened towel with natural detergent or a baby wipe.
Harsh detergents, abrasives, chlorine and solvents will damage the surface of the
unit and are not recommended.
• DO NOT attempt to clean or lubricate the internal parts.
• The power cord should always be untangled and free of any knots
to avoid electrocution or fire.
• For storage, coil the cord around the unit and store in a cool, dry, lint and dust-free place.