Medisana Minibreeze 60075, Instruction Manual

Page: 22 / 108

16
3 Operation
GB
3.2 Switching the unit on and off
Place the unit on a solid and flat surface for use, so that it cannot tip over. Swivel
the fold-out stands

outwards to make the unit more stable.
Insert the filled bottle tank

with the bottle cap screwed in place

into the
bottle base

.
Connect the mains adaptor lead to the socket

and plug the adaptor into the
mains outlet.
Open the mist outlet

by folding it upwards. When the mist outlet is closed, the
unit is not functionable.
Switch on the personal humidifier by turning the ON/OFF switch and the knob for
the mist intensity

from OFF to ON. The built-in LED

lights up next to the
nebulizer. When the bottle tank is empty, the light turns off and the unit turns off
automatically.
Then set the device depending on the room requirements at a position from the
lowest ( L ) to the highest ( H ) blower intensity. After a few seconds the mist from
the outlet

will be visible.
Blower intensity
lowest level ( L ) : approx. 50 ml/h
highest level ( H ) : approx. 100 ml/h
Switch the device off after use or when the water in the bottle tank has almost
been used up (the LED turns off) by moving the ON/OFF switch and the rotary mist
intensity knob

to OFF.
The device switches itself off automatically when the bottle tank is empty.
The blue illumination turns off.
60075_Minibreeze_West_Final_20.09.qxd:humidifier 20.09.2012 9:52 Uhr S