Medisana MC 826, Instruction Manual

Page: 26 / 112

18
GB
3 Operating / 4 Miscellaneous
• You can enhance the Shiatsu massage at any time with a vibration
massage for your thighs by pressing the vibration massage button
u
.
• The vibration massage in the upper thigh area can also be operated
separately by pressing vibration massage button
u
. Level indica-
tor LED “ 1 ” next to the button lights up and both vibration massage
motors are switched on. They begin with a gentle massage. Press
button again and the vibration level increases (medium intensity
massage LED “
2 ”). Press button a third time and the maximum vibra-
tion level (highest intensity massage, LED “ 3 ”) is switched on. After
button is pressed a fourth time, the vibration massage is switched off
and LED “
3 ” next to the button goes out.
• To switch on the air massage for the lumbar area press button
z
.
The LED “ 1 ” next to the button lights up ( 1 = low intensity). A second
press on the button
z
increases the intensity ( 2 = medium inten-
sity). A third press on the button
z
increases the intensity again ( 3 =
high intensity). After button is pressed a fourth time, the air massage
is switched off.
• The heat function can be activated at any time with the Shiatsu or
tapping massage, during which the vibration massage can also be
activated. Press the heat button
i
to activate the function; the
LED lights up. The heat is radiated through the massage heads
2
.
Press the button
i
again to de-activate the heat function; the LED
goes out.
•
To switch off the device:
Press the On/Off button
5
. The pow-
er LED begins to flash and the massage heads travel back
down to the “Park” position. When this position is reached,
the LED extinguishes. If you press the On/Off button
5
when one of the massage functions is switched on, the vibration
motors just stop immediately. First the massage heads travel down-
wards to the “Park” position. The power LED flashes meanwhile and
then extinguishes.
• After each use, switch the device off using the On/Off switch
5
and remove the plug from the mains socket.
3.2
Operation
• Before cleaning the device, make sure that it is turned off and the
mains plug is removed from the socket. Allow the unit to cool down.
• Only clean the Shiatsu massage seat cover with a soft cloth slightly
dampened with a mild detergent (e.g. soap suds). Under no circum-
stances should you use aggressive detergents, strong brushes, sol-
vents or alcohol.
• When cleaning, never immerse the unit in water and make sure that
no water gets into the unit.
4.1
Cleaning
and
main-
tenance
4 Miscellaneous