Downloaded from www.vandenborre.be
56
4 Utilização / 5 Memória
P
5.1
Indicação
dos valores
memorizados
4.4
Desligar o
aparelho
4.3
Medir a
tensão arterial
1.
Ligue o aparelho premindo o botão
2.
Se premir o botão
START
, ouve-se um sinal acústico (bip) e todos os
U1
ou
U2
). Para comutar para a outra memória, prima o botão
MEM
. A sua selecção é confirmada pressionando o botão
3.
4.
O aparelho está pronto para a medição, o display exibe o número
5.
O aparelho bombeia a braçadeira o tempo necessário até alcançar uma
pressão suficiente para a medição. Em seguida, o aparelho esvazia lenta-
mente o ar da braçadeira e efectua a medição.
6.
Quando a medição estiver concluída, o ar da braçadeira é esvaziado. A
pressão sistólica e diastólica, bem como o valor do pulso com o símbolo do
pulso são exibidos pelo display
. De acordo com a classificação da
tensão arterial da WHO (ver pág. 53), o indicado da tensão arterial
pisca
ao lado da respectiva barra colorida. Com a função de voz ajustada, os
resultados da medição são anunciados na língua ajustada. Se o aparelho
detectar um pulso irregular, a indicação da arritmia pisca adicional-
mente.
7.
Os valores medidos são memorizados automaticamente. As duas memórias
(
U1
e
U2
) têm capacidade para guardar um total de 120 valores de
medição com hora e data.
O aparelho dispõe de uma desactivação automática. Quando nenhum dos
botões é premido, o aparelho desliga-se automaticamente após um minuto.
O aparelho também pode ser desligado com o botão
START
.
A hora e a data são exibidas continuamente pelo display.
Em cada uma das memórias do seu medidor da tensão arterial pode-se guardar
até 60 medições (tensão arterial e pulso com hora e data). Os valores de
medição são memorizados automaticamente. Para consultar os valores de
medição memorizados, prima o botão
MEM
. O aparelho exibe a memória
ajustada (
U1
ou
U2
). Premindo o botão
START
, o aparelho comuta para a
outra memória. Se, durante 5 segundos, não premir qualquer botão, o display
exibe os valores de medição médios e as últimas três medições guardadas. Em
vez do número da
posição de memória
é exibido um “
A
” (Average =
média). Com a função de voz activada, os dados são anunciados na língua aju-
stada.
Depois de premir o botão
MEM
, o display exibe os valores das últimas
medições guardadas (número da
posição de memória
= “
01
”) com o
indicador da tensão arterial
a piscar. Se tiver sido detectada uma arritmia
durante a medição, o símbolo de arritmia também pisca. Se a função de