Medisana 88552, Quick Start Manual

Page: 8 / 52

8
ENGLISH
Disposal
This product must not be disposed of together with domestic waste. All users are obliged to hand in
all electrical or electronic devices, regardless of whether or not they contain toxic substances, at a
municipal or commercial collection point so that they can be disposed of in an environmentally
acceptable manner.
Please remove the battery before disposing of the device/unit. Do not dispose of old batteries with
your household waste, but at a battery collection station at a recycling site or in a shop.
8
2 Items supplied and packaging
Please check first of all that the device is complete and is not damaged in any way. In case of doubt, do
not use it and contact your dealer or your service centre.
The following parts are included:
• 1 3in1 cosmetics mirror • 4 batteries 1.5 V, type AA • 1 wall bracket • 1 stand
• 2 screws incl. wall plugs • 1 Instruction manual
The packaging can be reused or recycled. Please dispose properly of any packaging material no
longer required. If you notice any transport damage during unpacking, please contact your dealer
without delay.
3 Inserting/changing the batteries
Before starting to use the cosmetic mirror, you must insert the four batteries (1.5 V, type AA)
provided. To do so, unscrew the magnifying side of the mirror from the mirror housing by turning it
anti-clockwise. Remove the cover from battery compartment

and insert the four batteries provided.
Make sure the polarity is correct. Then close the battery compartment and screw the side of the
mirror you removed beforehand back on by turning it clockwise.
4 CM 845 cosmetics mirror
You can use the cosmetics mirror with the wall bracket
as a swivel wall mirror, as well as with the stand as a
portable standalone unit or just as a hand mirror.
Attaching as a wall mirror
Decide on the position of the wall bracket

. Unscrew
the two knurled nuts ( A ) and remove the mounting
plate ( B ). Use the mounting plate to mark the drill holes.
Drill the holes for the wall plugs and attach the
mounting plate with the screws and wall plugs
provided. Put the bracket back on the mounting plate
and fix it with the knurled nuts. Now insert the vanity
mirror into the bracket. Thanks to the two joints of the
wall bracket and the swivel joint

you can put the
mirror into the required position at any time. When you
do not need it, push it together to save space.
Using as a standalone unit
The stand

has a cone-shaped holder with a built-in magnet, and a magnet is also located at the
lower end of the handle. Hold the mirror on the handle and insert it into the holder of the stand

.
Using as a hand mirror
Remove the cosmetics mirror from the wall bracket or stand with the ergonomic handle to use it
quickly as a hand mirror.
5 Operation
This cosmetic mirror makes your daily facial care routine easier. It provides two illuminated mirror faces

, one which reflects your image in its original size and one with 5-fold magnification. They can be
rotated by 360° and in any direction required using the swivel joint

. The non-dazzle frame
lighting

, comprised of long-life white LEDs, is switched on and off using the I/O flip switch

.
A
B