18
19
When both slider control levers are pressed by the vertical rollers, which are a part of
the chassis/monoblock, the slider is unlocked and the chassis/monoblock can be freely
pushed further towards the ambulance. The function of the control levers is described
in more detail in the chapter Slider and Sliding Arm (p.14).
VERTICAL ROLLERS
THE VERTICAL ROLLERS ARE GUIDED TO THE SLIDER
LEVERS
TURNING THE LATCH
WARNING
When moving onto the slider, always try to align the chassis/monoblock to easily
unlock the both levers of the slider. Never use excessive force. There is a risk of
damage to the product.
GUIDING THE TILTING LEVER ALONG A
TILTED SURFACE
LOCKING THE TILTING LEVER IN THE
LOCK
1.
2.
Step 4
Move the chassis/monoblock to the end of the sliding arm. During this movement, the
tilting lever is unlocked. This lever is then guided smoothly along the inclined surface
to the lock, where it locks and secures the chassis/monoblock against the backward
movement. Try to pull the chassis/monoblock out of the ambulance to make sure that
it is locked.
DETAIL OF THE LOCKED TILTING LEVER
Step 3
Move the chassis/monoblock onto the slider while
trying to keep the longitudinal plane with the
loading device.
ALIGNING THE LONGITUDINAL PLANE OF THE CHASSIS/MONOBLOCK WITH THE
LOADING DEVICE
