UK/ N. IRELAND HELPLINE 0871 3761020
(costs 7p/min from BT landline, mobiles costs may be higher)
REP. IRELAND HELPLINE 1-800-992508
8
2. Connecting to a Sound Source
Your 2.1 system can take input from a sound card with the corresponding
output connections. These are usually indicated with ‘Line out’ or ‘Speaker out’
and have a green colour indication as a rule. Read the operating instructions of
your computer in the case of doubt.
Note:
Use the audio cable for connecting the audio connection
cable. You will have to use an appropriate adapter, if neces-
sary, if this is not possible.
Attention!
Digital connections are not supported and can
damage the device.
Locate the output of the computer and connect it to the
AUDIO INPUT
3
audio
input
on the 2.1 system by means of a 3.5 mm stereo phono connector.
The connections are usually indicated by colour. It can be that the colours
vary slightly. Refer to the operating instructions of your respective device to
be certain.
3. Connecting the Power Adapter
Connect the supplied power adapter to the
DC 15V 2A
5
connector on your
2.1 system and insert the power plug into an easily accessible power
socket. Do
NOT
switch on the 2.1 system yet.
Operation
1. Check that all volume controls are set to the lowest position. Turn the
control of the loudspeakers
1
und
2
of the 2.1 system to the left, until
a resistance has been overcome to do this.
2. Switch on your sound source and play a suitable sound.
3. Now, supply your 2.1 system with electricity, by turning the loud-
speaker control
2
to the right, until a resistance has been overcome.
The casings of the loudspeakers will shine blue as a sign that your
system is being supplied with electricity.
4. Now turn the volume controls of the loudspeaker boxes
2
and of the
subwoofer
1
carefully to the right, until a comfortable volume and a
balanced acoustic pattern has been reached. You will reduce the
volume by turning the control to the left.
Take the volume back to the OFF position and then switch off the source of
the sound, if you wish to end operation. The electricity supply will not be
interrupted by turning the loudspeaker control back
2
.
