Sound system
The external audio connections can be confi gured so that you can connect a surround
sound system.
If you wish to change the default volume, click the loudspeaker icon in the taskbar.
WARNING!
Damage to hearing!
Excessive volumes when using headphones or earphones, as well
as changes to the default settings on the equaliser, driver, software
or operating system, can generate excessive acoustic pressure that
can cause hearing loss.
− Before pressing play, set the volume to the lowest setting.
− Start playback and increase the volume to a comfortable level.
USB connection
Devices connected directly to the USB BUS may not draw
more than 500 mA. The power output is protected by a
fuse (limited power source as per EN 60950). If you want to
connect devices that require more power, you need to
connect them to two USB ports using a Y cable.
The USB 3.0 ports are fully backwards compatible with USB 2.0 and 1.1.
− Where possible, always connect your USB devices to the same port that they were
originally installed on. Otherwise you will be assigned a new ID and the drivers
will need to be reinstalled.
Network operation
Wireless LAN (Wi-Fi)
Your PC is equipped with WLAN. The components (module, antenna) have already
been integrated into your PC and activated. You can disable this function using the
Windows® device manager if required.
Wireless LAN enables you to establish a network connection to a corresponding
remote station.
Sound system
30
