36
11.2.6.
CI card menu
CAM Menu
User preference
CAM Info
If you want to watch subscription channels, you must first register with the channel provider. Once
you have registered, you will receive a Conditional Access Module (CI module) and a special card
from your provider. You will find information about the settings in the documentation supplied
with the module.
Install the CI components on your television in the following way:
Switch the television off and pull out the mains plug.
First insert the CI module in the slot on the side of the Smart TV. Then insert the card.
Please note: only insert or remove the CI module after you have disconnected the device
from the power supply.
NOTICE!
Risk of damage!
The CI module or the television could be damaged if you attempt to insert the CI
module by force.
The CI module must be inserted correctly: it cannot be inserted if it is the wrong
way round.
Connect the television to the power supply, switch it on, and wait for a moment
until the card is recognised.
Menu option
Settings
CAM MENU
Additional setup steps may be required for some CI modules, which
you can complete here in the CI card menu.
USER PREFERENCE
Select
DEFAULT, AMMI
or
BROADCAST
from the CAM information.
If no module is inserted, the message
NO CAM CARD.
appears on the screen.
The appearance and operation of the menu may vary depending on the module used.
Summary of Contents for MEDION LIFE MD 33980
Page 80: ......
