55 of 64
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
19.7.
Upgrading/Modifying and Repair
•
Upgrades and modifications to your All-In-One PC should only be carried out
by qualified specialists. If you do not have the necessary qualifications, have the
work carried out by a qualified service technician. Please contact your customer
service department if you have technical problems with your All-In-One PC.
•
If a repair must be carried out, please contact only our authorised
service
partners
.
19.7.1. Notes for Service Technicians
•
Only service technicians may open up the All-In-One PC housing or upgrade or
modify your All-In-One PC.
•
Use only original replacement parts.
•
Before opening the housing, disconnect all power and connecting cables and
remove the battery. If the All-In-One PC is not disconnected from the power
supply before being opened, there is a risk that components could be damaged.
•
Internal components of the All-In-One PC may be damaged by electrostatic
discharge (ESD). Carry out repairs, as well as system enhancements or
modifications, at an ESD workplace. If such a workplace is not available, wear
an antistatic cuff or ensure you are touching an earthed, metallic object. We will
charge for any repairs to damage caused by incorrect handling.
19.7.2. Information on Laser Radiation
•
The All-In-One PC can contain laser equipment classified as laser class 1 to laser
class 3b. The equipment meets the requirements for laser class 1.
•
By opening the housing of the optical drive, you will have access to laser
equipment classified up to laser class 3b.
The following should be observed when removing and/or opening this laser
equipment:
•
The integrated optical drive contains no parts that require repair or
maintenance.
•
Repairs to the optical drive should only be carried out by the
manufacturer.
•
Do not look directly into the laser beam, even when using optical instruments.
•
Do not expose the laser beam. Avoid exposing your eyes or skin to the laser
beam – either directly or through scattered laser radiation.
8806 Aldi AUS RC2 Content.indd 55
8806 Aldi AUS RC2 Content.indd 55
07.11.2012 12:06:51
07.11.2012 12:06:51