12 of 64
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
4.3. Ergonomics
PLEASE NOTE!
Avoid dazzle, reflections and strong bright-dark contrast in order to protect
your eyes
.
The All-In-One PC should never be placed next to a window because this is the
brightest part of the room in daylight. This brightness can make it more difficult
for the eyes to adjust to the darker display. The All-In-One PC should always be
positioned so that the direction of vision is parallel to the window front.
Setting up the All-In-One PC with your back to the window is incorrect as reflections
from the bright window on the screen will then be unavoidable. A position looking
onto the window is also incorrect as the contrast between the dark screen and the
bright daylight can cause problems for the eyes to adjust and result in problems.
The parallel line of vision should also be maintained in relation to artificial lighting
equipment.
In other words, the same criteria and principles apply where the workspace is
illuminated with artificial light. Where space restrictions make it impossible to set
up the screen as described, then correct positioning (rotating, tilting) of the
All-In-One PC/screen can prevent dazzling, reflections and excessive bright-dark
contrast, etc. In many cases, an improvement can also be achieved by using slats or
vertical blinds on the windows, partition walls or by changing the artificial lighting
equipment.
5.
Connecting
PLEASE NOTE!
The devices listed are not necessarily included with your All-In-One PC.
All the connections listed are optional and will not inevitably be available
on your All-In-One PC.
5.1. Cabling
Please follow the instructions below in order to correctly connect your n All-In-One
PC:
•
Arrange cables in such a way that no one can tread on or trip over them.
•
Do not place objects on the cables.
•
Do not apply force when connecting cables and plugs and make sure that
connectors are the right way round.
•
When you disconnect a cable from your device, pull it out by holding the plug
and not the cable
•
In order to prevent short-circuits and cable breaks, do not crush or bend cables
8806 Aldi AUS RC2 Content.indd 12
8806 Aldi AUS RC2 Content.indd 12
07.11.2012 12:06:46
07.11.2012 12:06:46