15 x 15 mm
14.10.2009 08:05
15
Bringing the device into operation
Please read the ‘Safety Notes’ Chapter from Page
Fehler!
Textmarke nicht definiert.
before bringing the remote
into operation, whatever happens.
Placing the battery into the remote
The battery will already have been placed in the remote in the
delivery status.
Pull out the isolating strips with the label ‘Please remove before use’
on the back of the remote before activating it.
Replacing the battery
The remote requires a 3 V, CR2025 button cell
battery.
Remove the cover of the battery compartment on
the back of the remote.
Place a Type CR2025 (button cell) battery into the
battery compartment of the remote. Pay attention
to the polarity of the battery here (marked on the
base of the battery compartment).
Close the battery compartment.
Remove the battery from the remote if the device will not be
used for a longer period. The remote could be damaged by a
Summary of Contents for MD 86162
Page 16: ...16 leaking battery ...
