19.08.2008 12:58
English
12
Connecting the subwoofer
This socket can be used for connection to a subwoofer (not supplied).
`
Switch the player to standby mode.
`
Connect one end of a phono cable (not supplied) to the
SUBWOOFER socket on the right-hand side of the
player. Connect the other end of the phono cable to the
subwoofer. If necessary, re-read the operating
instructions for the subwoofer.
`
Switch your player on using the
STANDBY
button.
Inserting the batteries in the remote
control
Insert 2 Mignon AAA 1.5 V LR 03 batteries (not supplied) in the
remote control.
`
Open the battery compartment by pushing the lid catch in
the direction of the arrow.
`
Insert the batteries so that the negative end is placed next to
the springs.
`
Close the battery compartment.
Connecting the antenna
The player has a wire aerial for VHF which needs to be adjusted for optimum reception.
The player has a built-in directional ferrite antenna for MW reception. You may therefore
need to turn the player to improve reception.
Connecting headphones
`
There is a headphone connection (
PHONES
) on the front of the player. Connect the
headphones with a 3.5mm jack plug. This deactivates the loudspeakers
automatically.
CAUTION!
Excessive pressure when using earphones and headphones can result in
damage to hearing and/or loss of hearing. Before pressing play, set the
volume to the lowest setting.
Start playback and increase the volume to one which is comfortable for
you. Using the headphones for long periods at high volume can damage
your hearing.
Summary of Contents for MD 82224
Page 24: ...19 08 2008 12 58 Espa ol 26...
Page 70: ...19 08 2008 12 58 Deutsch 26...
