19.08.2008 12:58
Getting started
11
ES
EN
DE
Connecting the loudspeakers
`
Connect the loudspeaker phono cables to the colour-
coded sockets on the right of the player marked
“SPEAKER OUT”. Red is used for the right-hand
loudspeaker socket, white for the left-hand loudspeaker
socket.
AUX IN (Line in) socket
You can use the AUX IN socket (press the
FUNCTION
button until
AUX
appears in the
display) for connecting an external audio signal (e.g. from a cassette recorder).
`
Switch the player to standby mode.
`
Switch your external unit off.
`
Plug the end of the phono cable (not supplied) into the
AUX
input socket on the right-hand side of the player
(note correct polarity of right and left channels).
`
Plug the other end of the phono cable into your external
unit.
`
Switch your external unit on.
`
Switch your player on using the
STANDBY
button.
`
Press the
FUNCTION
button on the remote control or on the player until “
AUX
”
appears in the display. The audio signal from your external unit will now be
reproduced.
Summary of Contents for MD 82224
Page 24: ...19 08 2008 12 58 Espa ol 26...
Page 70: ...19 08 2008 12 58 Deutsch 26...
