Medion MD 43438, User Manual

Page: 19 / 25

19
Connecting microphones
NOTICE!
The volume can be set both on the portable Bluetooth sound system and on the output device connected via
Bluetooth.
We recommend setting the volume on your Bluetooth-capable output device to maximum and performing the
fine adjustment of the volume on the portable Bluetooth sound system.
Please note that due to different firmware and software versions, in some cases not all operating functions will be
available.
− Hold the / / AMS 8 button down for approx. 2 seconds to disconnect the Bluetooth and start a new pair-
ing process.
Connecting microphones
The microphone can be used in all operating modes.
You can use up to 2 microphones at the same time. You can purchase additional microphones at specialist
retailers.
You can use microphones to play back your amplified voice.
Proceed as follows to connect the microphones:
− Switch off the portable Bluetooth sound system if necessary.
− Plug the microphone into the desired microphone socket MIC 1
2
or MIC 2
3
.
− Push the microphone switch to the ON position.
− Set the desired announcement volume with the MIC-VOL. control 15 .
− Press the ECHO 6 button to use the echo function.
− Press the ECHO button again to switch off the echo function.
− Push the microphone switch to the OFF position after use.
For information on using microphones from other manufacturers, refer to the associated operating instructions.
Cleaning
Before you clean the device, always switch off the power point and unplug the device first.
Use only a soft, dry cloth for cleaning. Do not use any chemical solvents and cleaning products because they can
damage the surface and/or the labelling on the device.
Do not allow any liquid to get inside the portable Bluetooth sound system.
Storing the device when not in use
If you are not going to use the portable Bluetooth sound system for an extended period, store
it in a cool, dry location and make sure that the device is
protected from dust and extreme fluctuations in temperature.