Operation
MD 42540
15
Radio functions
Selecting the waveband
• Press the
BND/LOUD/ENTER
button (19) to switch between FM (FM1, FM2 &
FM3), medium wave (MW) and long wave (LW). You can store up to 6 stations
in each band.
Searching for a station
• Briefly press the
TUN/TRK
8
(17) or
TUN/TRK 9
(18) scan buttons. The set will
search for the next station.
• Switch to manual station search by pressing one of the two buttons for two
seconds. The display shows
MANUAL
.
Save station
• After the search function has found a station, press one of the
1-6
(1015)
station buttons for around three seconds. A beep will sound to indicate that
the station has been stored.
The radio will switch back into automatic search mode after a few seconds.
Selecting stations
• Select the waveband by pressing
BND/LOUD/ENTER
(19).
• You can open one of the saved stations by pressing one of the station buttons
1-6
(1015).
Automatic saving
• Press the
AS/PS
button (8) until you hear a beep. The display shows
SEARCH
.
The scan stops for five seconds each time a station is found. The number
flashing on the display is the number of the button which saves the station.
The search continues automatically on weak stations.
Running through saved stations
• You can call up the saved stations for the current transmission areas.
• Select the waveband by pressing
BND/LOUD/ENTER
(19).
• Press the
AS/PS
button (8) briefly. All stations are now briefly selected.
• When you hear the station you require press the
AMS
button (8) briefly.
Autoradio MD 42540_AUS.fm Seite 15 Mittwoch, 30. November 2005 9:01 09
