Network/Internet settings
OK
BACK
EXIT
HOME
Network/Internet Settings
1
2
3
4
5
Network Type
Press WPS on your wifi router
Internet Speed Test
Advanced Settings
Wake on
Wireless Device
On
Next
You can configure network settings to access content on your home network and the internet. Select „Next“ to scan
Disconnected
MAC:
< >
Network Type
Wireless Device
<
>
Wireless Device
wireless networks.
Network settings
NETWORK TYPE
Use
22
to select the network type
WIRED DEVICE, WIRELESS DEVICE
or
DISABLED
.
After selecting
NEXT
with the direction buttons
and confi rming with the
OK
button
31
,
an overview of all available networks appears. Make a selection and press
OK
to confi rm. If a
password is required for a network, a virtual keyboard appears which you can use to enter
this with the help of the direction buttons
and the
OK
button. After entering the
password, select
OK
on the keyboard and press the
OK
button to confi rm.
PRESS WPS ON
YOUR WIFI ROUTER
(only for WLAN)
This option enables you to quickly establish a WPS connection via a wireless network
(WLAN). Press and hold the WPS button on your router and confi rm with the
OK
button. Then
the WPS connection is established.
INTERNET SPEED
TEST
Press the
OK
button to test the speed of the internet connection.
ADVANCED
SETTING
Press the
OK
button to call up further network confi guration options.
IP
CONFIGURATION
Select the
AUTOMATIC
or
MANUAL
setting here. If
MANUAL
is
selected, three additional lines appear, where the
IP ADDRESS,
SUBNET MASK
and
DEFAULT GATEWAY
data can be entered
manually with the aid of the direction buttons
and the
number buttons
17
.
DNS
CONFIGURATION
Choose between
AUTOMATIC
or
MANUAL
here. If
MANUAL
is
selected, two additional lines appear, where the
DNS SERVER 1
and
DNS SERVER 2
data can be entered manually with the aid of the
direction buttons
and the number buttons.
WAKE ON
Activate/deactivate the Wake-On LAN/Wake-On Wireless LAN function (WoL/WoWLAN). This
enables you to switch on the Smart TV via a different device (e.g. a smartphone with the
MEDION® Life Remote app). Both devices must be connected to the same network via LAN or
WLAN for this purpose. Select the
ON
setting to activate the function. The device being used
as a remote control must be connected to the TV set once when it is switched on. The control
function only works when the TV is in standby mode. If the TV is turned off and on again at
the mains switch, the connection between the two devices is automatically restored.
− Exit the network settings by pressing
OK
.
− After that please confi rm the Freeview Play terms of use.
25
Getting started
