47 of 92
DE
EN
TR
6.
LED
displays
LED
Display
Status
BLUETOOTH
Blue light
Bluetooth connection active
Flashes blue
Searching for Bluetooth connection
OPT/LINE IN/
WIFI
Lights up red
Operating mode
LINE IN/ AUDIO IN
Green light
OPTICAL IN
Flashes yellow
Waiting for WLAN connection
Flashes quickly yel-
low
WLAN operating mode (searching for
connection)
Lights up yellow
WLAN operating mode (connected)
Off
Standby mode
7. Controlling the volume via remote controls
for other devices
You can control the volume on the WLAN loudspeaker via the remote control for
your television set. To do this, the IR receiver on the WLAN loudspeaker must firstly
learn to read the signal from the new remote control.
Hold down the
EQ/LEARN
button on the remote control for the loudspeaker
for approx. 2 seconds.
The
OPT/LINE IN/WIFI
LED flashes red.
Now press
VOL +
on the remote control for the loudspeaker. The
OPT/LINE IN/
WIFI
LED flashes quickly red.
Point the remote control for the television set at the IR receiver on the WLAN
loudspeaker and then press the corresponding button for VOL +.
The
OPT/LINE IN/WIFI
LED stops flashing red.
Repeat this process for the VOL - function.
NOTICE!
Not every infrared code is compatible with the remote control for the
WLAN loudspeaker.
43061 DE EN TR ECommerce content RC1.indb 47
43061 DE EN TR ECommerce content RC1.indb 47
19.02.2016 14:05:19
19.02.2016 14:05:19
