54 of 92
In order to delete a WLAN loudspeaker from a
group, simply "pull" the desired WLAN loudspeaker
out of the group.
You can now play different music via each individual
WLAN loudspeaker.
NOTICE
You can also use the playback modes (LINE IN, AUDIO
IN, OPTICAL IN or BLUETOOTH) to play music on other
loudspeakers!
16. Playback via Bluetooth
Switch the loudspeaker to Bluetooth mode. The Bluetooth LED lights up blue.
Press and hold down the
PRESET/PAIR
button to switch the WLAN loudspeak-
er into Bluetooth pairing mode.
The Bluetooth LED will start to flash blue and a signal tone will sound.
Connect the smart device via Bluetooth with the Bluetooth device "
P 61076
".
The Bluetooth LED will light up permanently blue as soon as the WLAN loudspeaker
has been connected to the Bluetooth device.
17. Playback from an external audio device
Connect a 3.5 mm stereo jack to the
LINE IN
socket to play back stereo sound
output from other audio devices via the WLAN loudspeaker.
or
Connect a stereo cinch cable to the
AUDIO IN
socket to play back stereo sound
output from other audio devices via the WLAN loudspeaker.
or
Connect a Toslink cable to the
OPTICAL IN
socket to play back digital audio
signals from other audio devices via the WLAN loudspeaker.
•
Then use the
MODE
button on the loudspeaker or the
INPUT
button on the re-
mote control to select the corresponding operating mode (see “6. LED displays”
on page 47).
18. Charging a USB device via the USB socket
You can charge the battery on a device that is capable of being charged via a USB
connection using the USB socket on the WLAN loudspeaker.
Connect the device that you want to charge to the USB socket on the rear of the
WLAN loudspeaker using a USB cable.
43061 DE EN TR ECommerce content RC1.indb 54
43061 DE EN TR ECommerce content RC1.indb 54
19.02.2016 14:05:21
19.02.2016 14:05:21
