39 of 80
DE
EN
TR
9. Switching the loudspeaker on and off
Switching on the loudspeaker
Press the
MODE/STANDBY
button on the loudspeaker to turn it on.
The loudspeaker switches to the last mode set.
Standby mode
Press and hold down the
MODE/STANDBY
button until the Bluetooth and
WIFI
LEDs go out to switch the loudspeaker to standby mode.
In standby mode, the loudspeaker maintains its network connection so that it is im-
mediately available to use when it is switched on again. The loudspeaker consumes
more electricity in this operating mode than in standby mode.
10. Using the device for the fi rst time
•
You can connect the WLAN loudspeaker to your router's existing network with
the
WPS
button.
•
When using the WLAN loudspeaker for the first time, position it as near as possi-
ble to the router in order to guarantee a clear WLAN signal during the setup pro-
cess. Then move the WLAN loudspeaker to the desired position within the range
of the WLAN signal.
10.1. WLAN connection via WPS
If your router has a
WPS
button, you can easily connect the loudspeaker to the net-
work using this button:
Press the
WPS
button on the WLAN loudspeaker until the
WIFI
LED flashes in
yellow.
Now press the
WPS
button on the WLAN router.
NOTICE!
Please also refer to the instructions for the router.
The device will now establish a connection with the network. The
WIFI
LED flashes
quickly while the connection is being established.
•
Once a connection has been successfully established, the
WIFI
LED will light up
permanently in yellow.
•
The device can now play back audio signals via the network.
•
The device saves the connection data so that it does not need to be entered
again when the device is switched on again.
43060 DE EN TR ECommerce content RC1.indb 39
43060 DE EN TR ECommerce content RC1.indb 39
19.02.2016 13:53:36
19.02.2016 13:53:36
