56
12.2. Inserting a disc
Make sure that there is about 15 cm of space in front of the device so that the CD
compartment can open without hindrance.
If the device is switched off, press the
button.
Insert a disc slowly into the disc compartment with the printed side upwards.
Playback of the disc starts automatically after a few seconds. You may have to press
/
to start playback.
12.3. Starting/stopping playback
Press
to start playback of music tracks. To pause playback, press the button
again. Pressing the button once more resumes playback.
12.4. Track selection, fast rewind/forward
Press the
button to return to the start of the track currently being played.
Press the button again to skip to the previous track. Use the
button to jump
to the next track.
Hold the
button down to cue backwards within a track or
to cue forwards.
12.5. Direct track selection
Press the
0–9
buttons on the remote control to select a track directly. If the track
has a multi-digit number, press the buttons one after the other.
12.6. Program the playing order of tracks
The program function allows you to compile your own playlist by only selecting
specific tracks for playback. You can specify the order in which the list is played
yourself. Proceed as follows:
Press the
button to stop the playback if necessary.
Press the
PROGRAM
button.
Press
or
and select the desired track. Alternatively you can use the digits
buttons for the respective title numbers (i. e. 03).
Save the track using
PROGRAM
.
Repeat these steps until all tracks have been programmed.
