20
6.8.4.
Satellite
Setting
SATELLITE
Use
to select the satellite for which you want to change the settings or carry
out a search, and then confirm with
O K
.
EDIT
If desired, press the
yellow
button to edit the selected satellite.
LONGITUDE
DIRECTION
Use the direction buttons
to select the orbit position
WEST
or
EAST
.
LONGITUDE
ANGLE
Use the number buttons to enter the angle.
BAND
Select the frequency band
KU
or
C
.
RENAME
Press the red button to change the name of the satellite. Press the
arrow buttons to select the character you require. Press
O K
to save
the new name.
ADD
Press the
red
button to add a new satellite. The setting options are the same here as
under
EDIT
.
DELETE
Select the satellite that you want to delete from the list and press the
green
but-
ton. Confirm the prompt by pressing
YES
.
TRANSPONDER
Select the transponder for which you want to change the settings or for which
you want to start the search.
EDIT
If desired, press the
yellow
button to edit the selected transponder.
FREQUEN
CY
Use the number buttons to enter the frequency.
SYMBOL
Use the number buttons to enter the Baud rate.
POLARI
ZATION
Press
to select the polarity.
LÖSCHEN
Select the transponder that you want to delete from the list as described above
and press the
green
button. Confirm the prompt by pressing
YES
.
ADD
Press the
red
button to add a new transponder. The setting options here are the
same as for
EDIT
.
LNB POWER
Set the LNB power here.
LNB TYPE
Enter the oscillator frequency for your LNB type here. The default setting is
UNI
VERSAL
.
22KHZ TONE
Set the sound here. The default setting is
AUTO
.
TONEBURST
If your satellite system requires a tone burst, you can set it to
BURST A
or
B
here.
DISEQC 1.0/1.1
If you have connected multiple LNBs or a DiSEqC switch to your satellite aerial,
set the LNB you require here.
MOTOR
If your satellite antenna is controlled by a motor, press
to select the DiSEqC
version. Press the
O K
button to define the position of the antenna.
UNICABLE
The following
UNICABLE
settings can be made here.
SLOT
This is where you specify a particular channel.
FREQUEN
CY
You can set the centre frequency here.
PIN
You can set the satellite position here.
LNB
Select the LNB here.
VERIFY
Press the OK button to accept the settings.
