EN
23
6.7.4. Satellite
If you have previously activated the reception type
SATELLITE
, you can now make settings for the
antenna type.
To set the antenna type, select one of the following antenna types:
–
DIRECT
: Select this antenna type if you have a single receiver and a satellite antenna. Press
the
OK
button and then choose the desired satellite (you can also call up the transponder list
using the
blue button
). Afterwards, press the
O K
button again to start the search. After that,
decide whether or not the channel list should be loaded.
–
UNICABLE
: Select this antenna type if you have multiple receivers and a single-cable system.
Press the
O K
button and make all the necessary settings regarding
SATELLITE POSITION 1/2,
USER BAND
and
BAND FREQUENCY
(here you can also call up the transponder list using the
blue
button
). Afterwards, press the
O K
button again to start the search. After that, decide whether
or not the channel list should be loaded.
–
DISEQC SWITCH
: Select this antenna type if you have multiple satellite antennas and a DiSEqC
switch. Press the
O K
button and activate the desired
DISEQC
switch
1 4
(here you can also call
up the corresponding transponder list using the blue button). Afterwards, press the
O K
but-
ton again to start the search. After that, decide whether or not the channel list should be loa-
ded.
During the search, the scan progress is displayed. In addition, the number of found TV and radio
stations is displayed.
Afterwards, press
O K
to continue.
Amazon Alexa (optional): The device can be controlled using Amazon Alexa. For more informa-
tion, please refer to the description under
SYSTEM > VOICE ASSISTANT
.
At the end of automatic program storage, a TV programme is shown.
The initial installation described here corresponds to the
FIRST TIME INSTALLATION
op-
tion in the
INSTALLATION
menu
.
