Medion LIFE P13161, Instruction Manual

Page: 37 / 62

A
34
34
Media Mode
The LED LCD TV comes with 1 USB port (rear) that can be accessed via Media mode.
Media Mode and USB Connectivity

Plug in your external USB device (USB stick, external hard disk drive) into the
USB port of the TV. Drive numbers (C:\, D:\, E:\ etc) will be allocated depending
on the partitions of the USB device (e.g. an external hard disk drive might have
several partitions). For the definition of how drive numbers are assigned, please
see “Drive Assignment Definition” below. (Please note that external USB
memory devices of a capacity of up to 1 TB are supported. However, not all
brands and drivers of external USB memory devices might be compatible with
this LED LCD TV)

You can select the drive for your recording session.

Please note that the external USB device needs to be formatted first before the
recording can be done. To do this, under DTV mode, in the OSD, go to SETUP
page then select “
PVR File System ”.

Select disk drive by pressing “ OK ”.

At the next screen you will have option to select USB device if there is more then
one and to select drive with directional pad on the remote control (C:\, D:\ etc)

Press “ok” to format.

You can select to format the USB device into FAT32 file system or High Speed FS
system by using directional pad on the remote control:

FAT32 is suitable for USB thumb drive (USB memory sticks) that will format the
entire USB drive completely. (Attention: All data currently on the USB memory
stick will be lost. Please save your data on your external USB memory stick
prior to using it as a recording device)

High Speed FS is suitable for external USB hard disk drives that will allow
choosing how large a new partition allocated for recording will be.

While recording, on your external USB device a new folder will be created
labelled “MSTPVR”.

The OSD will show the file format and size selected, how many minutes of the
TV program can be recorded in either SD quality or HD quality from the source
media.

After selecting the system type and size, press OK again will start the formatting.

After the USB device has been formatted, it can be used for recording under DTV
mode.

The default recording drives will always be C:\, unless different drive is selected
using method from 2-7. (Please also refer to the part “PVR Function and Drive
Assignment” of this manual).