Medion LIFE MD 31323, User Manual

Page: 32 / 82

32
Setting
LNB POWER Set the LNB power here.
LNB TYPE
Enter the oscillator frequency for your LNB type here. The default
setting is
UNIVERSAL .
22KHZ TONE Set the sound here. The default setting is AUTO .
TONBURST
If your satellite system requires a tone burst, you can set it to
BURST A or B here.
DISEQC
1.0/1.1 If you have connected multiple LNBs or a DiSEqC switch to your
satellite antenna, set the desired LNB here.
MOTOR
If your satellite antenna is controlled by a motor, press

to se-
lect the DiSEqC version. Press the OK button to define the posi-
tion of the antenna.
UNICABLE
The following UNICABLE settings can be made here.
SLOT This is where you specify a particular channel.
FREQUEN
CY
You can set the centre frequency here.
PIN You can set the satellite position here.
LNB Select the LNB here.
VERIFY Press the OK button to accept the settings.
SEARCH
Select this option to make the settings for the search.
SATEL
LITE Select the satellite for which you want to carry out a
search.
TRAN
SPONDER Select the transponder on which the search will be
started.
SCAN
MODE
Decide which channels you want to search for: FREE
(free channels), SCRAMBLED (encrypted channels) or
FREE+SCRAMBLED (free and encrypted channels).
SERVICE
TYPE
Select the channel type.
DTV : Search for digital TV channels.
RADIO : Search for digital radio stations.
ALL : Search for digital TV channels and digital radio
stations.
SCAN
TYPE
Set the search mode.
DEFAULT : A search will be run on the selected satel-
lite, based on the transponder list saved for this satel-
lite. This will take some time.
NETWORK : Activate/deactivate the network scan.
PRESET : Select this to load the preinstalled chan-
nel list for the Astra 19.2E satellite. This search mode
takes the least time.