42 / 81
6.3.2.
Connecting to the repeater’s
access point using the WPS button
The quickest, easiest and most secure way of
establishing a wireless connection between the
repeater and the device that is to be connected to the
access point is by using the WPS button.
To connect to the AP using the
WPS
button,
proceed as follows:
WPS
Signal
WLAN
Power
WPS
LAN
(image similar)
Press the WPS button on the repeater twice in
quick succession. The WPS LED starts to flash.
Now press the WPS button on the device that you
wish to connect to the repeater’s AP. This step must
be carried out within two minutes.
The connection is established and the network
information is exchanged.
Once the connection has been established, the
87119 UK Aldi Content Final rev5.indd 42
87119 UK Aldi Content Final rev5.indd 42
25.08.2014 14:44:53
25.08.2014 14:44:53
