manualshive.com logo in svg

Medion E85029 MD 87119, Instruction Manual

Share
Download
Medion E85029 MD 87119 Instruction Manual Download Page 53

54 / 81

point is shown automatically.

 

Click the 

APPLY

 button to finish the process.

The data are saved and the repeater restarts.

 

After the restart of the repeater is completed, the 
home page of the web interface will reappear. You 
can now close the browser.

7.4.2. 

Access Point mode

 

Start by selecting an SSID for the access point.

 

In the next step, you can make the security settings 
for the access point.

 

Select the required method in the option 

ENCRYPTION

.

 

Depending on the encryption method selected, 
further input and selection fields will be displayed.

 

Finish making your settings by clicking on the 

NEXT

 button.

 

Check the selected settings and click on 

APPLY

 to 

finish the process.
The data are saved and the repeater restarts.

 

After the restart of the repeater is completed, the 
home page of the web interface will reappear. You 
can now close the browser.

87119 UK Aldi Content Final rev5.indd   54

87119 UK Aldi Content Final rev5.indd   54

25.08.2014   14:44:55

25.08.2014   14:44:55

Summary of Contents for E85029 MD 87119


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands