46
DVD mode
SETUP menu in DVD mode
Press the
SETUP
button
33
in DVD mode. The main page of the SETUP menu appears on the screen. The follow-
ing menus are active in DVD mode:
•
GENERAL SETUP PAGE
•
AUDIO SETUP PAGE
•
PREFERENCE PAGE
Navigating in the menus
Use
25
to select between the menus. The active menu is highlighted in orange. Use
25
to select the
menu options; the selection options will be shown on the right-hand side. The active setting is highlighted in
brown.
To change a setting, use
to go to the right-hand side and then select a different option using
. Press
EN-
TER
to confi rm.
Use
to get to the higher-level menu selection.
Press
D.SETUP
to leave the setup menu at any point.
Menu: General Setup Page
TV DISPLAY
Here you set the device‘s display format to match that of the
television.
4:3 PAN SCAN:
Selection for televisions with a 4:3 format. The pan
scan format displays 16:9 fi lm formats in full height; the side sections
of the image are cut off.
4:3 LETTER BOX:
Selection for televisions with a 4:3 format. The let-
terbox format reduces the 16:9 fi lm format to the size of the screen.
WIDE:
Selection for televisions with 16:9 format.
OSD LANG
This sets the OSD (on-screen display) language, i.e. the language for the device menus.
Once you select a language the menu changes immediately.
SCREEN SAVER
If the screen saver is activated (
DEFAULT
), a screen saver will appear if no buttons are pressed for 3 minutes (but
not during playback).
LAST MEMORY
With this function, the DVD player remembers where the last DVD was at when it was stopped. If you insert the
same DVD into the device again, playback will resume from the last position. The last position on the DVD will be
remembered even if the device is switched off.
Menu: Audio Setup Page
Select the
AUDIO SETUP PAGE
menu option to set the sound mode.
SPEAKER SETUP
Downmix
If you use the analogue output you can change the loudspeaker set-
tings from this menu.
•
LT/RT:
Select this setting if you want to choose only the right or
the left output channel.
•
STEREO:
This option produces stereo sound. Choose this setting if
the sound is played through two speakers only.
DUAL MONO
Here you can chose a dual mono setting (
STEREO, L-MONO, R-MONO
or
MIX-MONO
).
- - G e n e r a l S e t u p P a g e - -
TV Display
OSD Lang
Screen Saver
Last Memory
16:9
ENG
Default
On
Speaker Setup
- -
A u d i o S e t u p P a g e - -
Dual Mono
IMA 21571 Content V2.0.indd 46
IMA 21571 Content V2.0.indd 46
29.11.2019 08:53:12
29.11.2019 08:53:12
