Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 9
C
M
Y
CM
MY
CY
CMY
K
- 9 -
Never use your fingers or other object
s to push in ingredient
s!
As soon as you have finished processing or if the maximum fill volume of the mixing bowl has been
reached, switch of
f the food processor (0).
You may remove the cover with the pusher (turn and lif
t of
f lid) only af
ter the motor has come to a
complete st
andstill.
Then carefully remove the disc.
Now
you
can
release
the
work
bowl
by
turning
and
fill
the
ingredient
s
into
another
cont
ainer
for
further
processing.
The blender
Using the blender
, a wide range of mix drinks, shakes, and soup
s can be prep
ared quickly
.
First, fit the work bowl and snap it into place by turning (note markings).
Fit the cover with the pusher and snap this also into place by turning (note marking).
Remove the protective cover on the motor housing by turning and lif
t-of
f.
Now t
ake the blender and screw it down in the motor housing until the markings match
(line and point).
Now place the required ingredient
s into the blender (but not more than up to the max. fill height).
Now firmly fit the lid of the blender (turn in an anticlockwise direction) and switch the food processor
to the required performance level (please note the t
able on p
age 10).
When blending is in progress, you can use the small aperture in the lid to carefully fill in additional
ingredient
s. Please note that the maximum filling volume is not exceeded.
Af
ter the motor has come to a complete st
andstill, you can remove the blender and fill the content
s
into a corresponding cont
ainer (pot, carafe, or bowl).
Screw blender in a
clockwise
direction
onto
the
motor
aperture,
until
it engages audibly
.
Close lid by
turning in an
anticlockwise
direction.
P
0f
f
2
3
1
4
5
