Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 6
C
M
Y
CM
MY
CY
CMY
K
- 6 -
Inst
allation and connection
Place the food processor on a level dry worktop.
The location must be close to an easily accessible
household power socket 230V ~ 50Hz.
Before first use
Please rinse the complete accessories incl. work bowl, lid, and pusher in warm water with washing-up
liquid before first use.
Never immerse the motor block in water or other liquids.
Please
note
that
the
processing
blade
as
well
as
the
slicing
and
shredding
discs
are
extremely
sharp (risk of injury).
When in use for the first few minutes a slight odour may develop which disappears again very quickly
and is completely harmless.
This unit is fitted with protection against overheating. If the unit should cut out suddenly whilst in use,
please set the switch to position "0".
Af
ter approximately 15 minutes the unit has completely cooled
down and is again ready to operate.
The processing blade
Using the processing blade you can stir
, knead or chop various dif
ferent foods.
Caution: The blades are extremely sharp!
Fit the work bowl and snap it into place by turning (note markings).
Then place the processing blade onto the drive axle until it snap
s into place audibly
.
Now you can fill the work bowl with the ingredient
s.
When making a dough, it is recommended to fill in first the dry ingredient
s (flour
, sugar
, or similar) and
then the other ingredient
s (eggs, fat, milk, or similar).
Finally
, fit the cover with the pusher and snap this into place by turning (note marking).
Set the food processor to the required performance level (note the t
able on p
age 10).
If the dough is finished, switch of
f the food processor (0).
Af
ter the motor has come to a complete st
andstill, remove the cover with the pusher by turning and
lif
ting of
f.
Carefully remove the processing blade.
Release the work bowl by turning and use the sp
atula to fill the dough into another cont
ainer for further
processing.
