English
9
DE
EN
FR
ES
DK
NL
Connections on the back
1
2
3
4
5
(Ill.: Rear of the monitor)
1.
Power supply (POWER IN)
2.
3.5 mm stereo jack audio connection (AUDIO IN)
3.
DVI-D 24-Pin connection (DVI)
4.
Mini 15-pin D-sub connection (VGA)
5.
Intake device for protection against theft (Kensington lock)
Connecting the monitor
Ensure that the TFT monitor has not yet been connected to the electricity supply (mains plug not yet
plugged in) and that neither the TFT monitor nor the computer has been switched on.
Prepare your computer for the TFT monitor if necessary, so that the correct settings for it will be present.
1 Connect signal cable
Plug the signal cable into the appropriate VGA or DVI connections on the computer and the TFT monitor.
2 Connect audio cable
Plug the audio cable into the appropriate audio sockets on the computer and the TFT monitor.
3 Connect the power supply
Connect the power cable of the power pack to the TFT electricity supply connection.
Now, connect one end of the mains cable to the power pack and connect the other end to a suitable socket.
The mains socket must be in the vicinity of the TFT monitor and be easily accessible (use the same electricity
circuit as for the PC).
4 Switch on the monitor
Switch your monitor on at the Standby/On switch on the front of the device.
Finally, switch your computer on.
