CHAPTER 3
AWARD
®
BIOS SETUP
3-10
Boot From LAN First
During Enabled, if there’s a LAN card onboard, the priority booting
will be from the LAN.
Boot Sequence
This category determines which drive the computer searches first
for the disk operating system (i.e., DOS). The settings are CD-ROM,A,C/
A,C,SCSI/C,A,SCSI/C,CD-ROM,A/CD-ROM,C,A/D,A,SCSI/E,A,SCSI/
F,A,SCSI/SCSI,A,C/SCSI,C,A/C only/LS/ZIP,C. Default value is CD-
ROM,A,C.
Swap Floppy Drive
Switches the floppy disk drives between being designated as A
and B. Default is Disabled.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed
is 40 or 80 tracks. 360K type is 40 tracks while 760K, 1.2M and 1.44M are all
80 tracks.
Floppy FIFO Control
During Enabled, the FDD disk will perform better.
Boot Up NumLock Status
The default value is On.
On (default)
Keypad is numeric keys.
Off
Keypad is arrow keys.
Gate A20 Option
Normal
The A20 signal is controlled by keyboard
controller or chipset hardware.
Fast(default)
The A20 signal is controlled by port 92 or
chipset specific method.
