Securing Your Child
18
Once the child seat has been installed in the vehicle and
adjustments have been made, follow these instructions to
secure the child.
・
Loosen the harness by pressing the harness strap release
lever
(in Red)
on the front of the child seat, then pull the
shoulder straps forward (Fig. A).
・
Unfasten the harness buckle by pressing the release button
and sliding the tongues out (Fig. B).
・
M
ove the harness straps to the side of the child seat (Fig. C).
・
Place the child in the child seat (Fig. D).
・
Position the harness straps around the child and fasten the
harness buckle. Proper connection is confirmed with a
positive click after inserting each buckle tongue (Fig. E).
・
Gently pull up on the harness straps to tighten the lap
section, which should fit low on the child’s body (Fig. F).
・
Slowly pull the harness adjuster strap to tighten the
harness around the child (Fig. F).
・
Verify that the harness (5-point) is not twisted and child is
properly secured.
・
After you secured child with the harness (5-point) of the
child seat, fasten vehicle's lap shoulder (3-point) safety
belt over the child seat routing through the belt path on
the the shoulder and the lap belt guides (red plastic parts)
at both sides of the child seat (Fig. G). Proper connection is
confirmed with a positive click sound after inserting the
buckle tongue of the vehicle's lap shoulder (3-point) safety
belt into the buckle of the vehicle's seat.
・
The child's hip should be positioned as deep as possible
to firmly secure.
・
Verify that the vehicle's lap shoulder (3-point) safety belt is
not twisted or sagging, properly routed through the belt
path and the belt guides of the child seat. It is necessary
that the buckle of the vehicle's seat
should be
positioned lower than the belt guides of the child seat
to firmly secure the child.
A
B
C
D
E
F
G
Summary of Contents for Carrot 3000
Page 27: ... Memo ...