21
75
76
77
78
79
• Close the zip as shown.
Illustration 76 shows the mounted headrest pads (low version)
inklusive upholstery.
5.6 Universal headrest bracket
(in connection with backrest until shoulder height only)
The universal headrest bracket gets mounted on the backrest plate.
After loosening the adjusting lever it is possible to adjust a inserted
headrest in the height.
5.7 Headrest with occiput upholstery
in connection with Kopfstützenhalter universal)
After loosening the counter nut on the universal joint it is possible to
adjust the headrest three dimensional.
After loosening the upper wing nut it is possible to adjust the
headrest by the long hole in the depth.
After loosening of both wing nuts it is possible to adjust the headrest
by using the lock washer.
The blank sheet inside the uphplstery can be adjusted to the head
shape.
The cover can be removed for cleaning.
5.8 Trunk supports
The trunk pads are mounted to the back with back upholstery
removed.
The trunk pad gets positioned as shown in the illustration and the
screw gets plugged through the long hole in the backrest plate.
