15
cleaning mode (purge) cycle. A continuous flow volume of distilled
water will clean the system internally, preventing corrosion or mineral
accumulation automatically for 30 seconds.
d.
Step on the foot switch pedal for ending the cleaning mode
cycle before 30 seconds if necessary. After the cleaning cycle, press
again the two buttons simultaneously to exit cleaning mode.
WARNING:
•
Cleaning mode (purge cycle) needs to be done always after the
use of reservoir (tank) or accessory bottles.
•
Do not leave irrigants/water inside the reservoir/bottles after use.
Discard the irrigants used in a proper way.
•
Special attention with corrosive irrigants like sodium hypochlorite
is need.
Do not use
concentrations more than 2.5%. Handle
sodium
hypochlorite with maximum care.
