www.mediclinics.com
-15-
CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO
NOT PLAY WITH THE HAND DRYER.
Correct cleaning of the machine will lenghten its working life
considerably.
When in use, the machine will accumulate dust inside wich should be
cleaned out if used regularly, at least once a year.
1.- Remove the mains supply to the hand-dryer.
2.- Remove the cover (see the section "Dismanttling for installation" in this manual).
3.- Clean away any accumulated dust on the scroll-fun with a soft-bristle brush while
rotating it manually.
4.- Use the same brush to clean away all accumulated dust from the other
components.
5.- Use a medium brush to clean the air inlet grill. Check the motor brushes
condition. These should be replaced when they are less than 5 mm (0.2").
6.- Carefully remove any dust from the electronic circuit using a fine brush. Check
that there is no dust or other dirt on the hand-detection sensors.
7.- In automatic models ensure that the IR LED visor is clean and check that it is
completely transparent.
8.- Once all maintenance operations have been completed, replace the cover (see
the section "Installation" in the manual) and then reconnect the mains supply.
9.- Start up the machine and leave until no further dust remaining from the cleaning
process, comes out from the nozzle.
CLEANING OF CHROMED AND PLATED COVERS
For cleaning purposes only a wet cloth is to be used. Do not use
any kind of detergent, acids, lye, abrasives, hydrochloric acid, etc.
Take care not to damage or force any component.
NOTE: All maintenance and cleaning processes must be carried
out by qualified personnel.
PREVENTIVE MAINTENANCE AND CLEANING
CLEANING METHOD
distributed by
RESTROOM DIRECT 704 . 937. 2673
www.
RestroomDirect
.com
