Figure 5
EMERGENC
Y
RESET
TEST
Volume:
70°F
Figure 4
ON/OFF
Switch
OFF ON
USB
Model Number: WBS GEN1.0
Serial Number: WB1XPD224Z
FCC ID:PXTWBS-01
IC ID:10876A-WBS01
IMEI Number:355306040196802 MobileHelp
Made in Malaysia
6
7
Cellular Medical Alert User’s Guide | Customer Support 1-800-726-5648
Cellular Medical Alert User’s Guide | Customer Support 1-800-726-5648
Step 2. Plug in the Power Cord (Please refer to figure 3.)
Plug the power cord that is attached to the back of the Base Station into an electrical outlet that is not
controlled by a light switch.
Step 3. Turning on your Base Station (Please refer to figures 4 and 5.)
•
Turn on your Base Station using the on/off switch located on the back.
•
If the Base is set up correctly, the Base Station will say “system ready.”
•
To avoid accidentally turning off the Base Station, DO NOT plug
into an electrical outlet that is controlled by a light switch.
Warning
To prevent electrical shock please keep the system away from wet locations.
•
Do not place near any appliances that make noise.
•
The emergency and reset buttons will illuminate.
•
The display screen will turn on.
•
You can use the volume control buttons on the
front of the unit under the display screen if the
voice is too loud or too soft.
•
Make sure your Base Station is connected to
the cellular network by checking for the signal
strength bars on the display screen.
•
Within a few minutes of turning on the system, the
Cellular Base Station will obtain the date and time
from the cellular network and will appear in the
display area. You are not able to set the date and
time manually.
•
We recommend you place the Base Station near
the center of your home, such as your living
room or family room and as close as possible to
a window to improve the cellular reception, see
signal strength indicator.