0483
Date
21 October 2021
CT/ MRI compatible MF-System
IFU GA-008-02
Revision
01
Page
Seite
25
von
37
Connecting to Maquet OR-table (CT-/ MRI compatible system)
1.
2. Table adapter is fixed to the operating table
via these 4 screws and nuts. If there is a
thread in the table, the screws are screwed
directly into the table.
3. Clamping lever is released by turning
counterclockwise, thus the rotary plate can
be rotated around the axis of the clamping
bolt and is freely movable in a diameter of
60 mm.
4. Maximum adjustment possibilities to the left
when the clamping bolt is positioned
concentrically in diameter 60 mm, i.e. when
the toothing grooves of the swing arm plate
are exactly under the toothing grooves of
the swivel plate.
Maximum adjustment possibilities to the
right when the clamping bolt is positioned
concentrically in the 60 mm diameter, i.e.
when the toothing grooves of the swing arm
plate are exactly under the toothing
grooves of the swivel plate.
5. In addition to the described rotation, the
table adapter can be extended to the
minimum.
6. The table adapter can be extended to the
maximum.
7. Clamping lever is clamped by turning it
clockwise to the desired position.
Clamping lever
Swivel plate
Clamping bolt
Swing arm plate
OR-
table
screws
Screw 1
Screw 2
Screw 3
